This article is for technical sharing only and does not constitute any investment advice.

Will BTC also have its own smart contract?

Recently, in the Bitcoin ecosystem, Fractal BTC finally launched its mainnet in September after multiple testnets. One of the major features of Fractal is its "smart contract" capability, and it launched a new token protocol CAT 20 almost at the same time as the mainnet was launched. What technical ingenuity does CAT 20 have? What can we learn from it?

Fractal Bitcoin

Before understanding CAT 20, we need to have a brief understanding of Fractal Bitcoin. Their relationship is like that of ERC 20 and ETH. The CAT 20 protocol is deployed on Fractal Bitcoin.

Fractal Bitcoin, also known as fractal Bitcoin, is a "second-layer" network that is fully compatible with BTC. Compared with BTC, its block confirmation time is faster, only 1 minute. Its basic principle is simply as its name suggests, that is, the BTC network is copied several times, and each chain will process transactions. With more nodes that can process transactions, the speed will naturally be faster. However, the specific details such as how different chains communicate with each other are not very clear at present, and there is no official corresponding technical documentation for reference.

If it is just a second-layer chain transaction that is faster, it seems that there is nothing exciting. However, in Fractal, the operation code OP_CAT, which was abandoned by BTC a long time ago for security reasons, is enabled, which makes Fractal Bitcoin's capabilities rise to a higher level. Some people say that OP_CAT can make BTC have the ability of smart contracts, which gives more room for imagination.

Now, someone has implemented a protocol similar to ERC 20 on Fractal Bitcoin.

We will discuss in detail why OP_CAT was abandoned and why it can be used on Fractal Bitcoin later. Here we focus on CAT 20.

CAT Protocol For the following content, please refer to the white paper: Introduction | CAT Protocol (https://catprotocol.org/)

And GitHub repository: GitHub - CATProtocol/cat-token-box: A monorepo for packages implementing CAT protocol (https://github.com/CATProtocol/cat-token-box)

With the underlying OP_CAT support, a corresponding protocol, CAT Protocol, will soon be available. Currently, a protocol that is already running is the CAT 20 protocol, and a corresponding panel has been added on Unisat: https://explorer.unisat.io/fractal-mainnet/cat20.

Seeing the name CAT 20, you should be able to react that it should be similar to ERC 20. Compared with the mature ERC 20 protocol, it is already very convenient for everyone to deploy a token. How does CAT 20 achieve a life cycle similar to ERC 20?

Deploy

Before deployment, users need to specify their wallet address and basic information of the token. The basic information of the token is similar to that of ERC 20:

There will be some differences. CAT 20 can set the pre-mining and mint quantity limit each time. Of course, ERC 20 can also achieve these capabilities through the contract capabilities.

During the deployment phase, two transactions are initiated, which can be considered as two stages: "commit" and "reveal". Referring to the official diagram, the deployment stages are as follows:

In the " commit " phase, the basic information of the token will be written into the output script of the transaction, such as the name and symbol of the token. The hashId of the transaction initiated in the " commit " phase will be used as the logo of the token to distinguish it from other tokens.

You can see that the utxo of the transaction " bc 1 pucq ... ashx " corresponds to commit. Then the remaining two transactions point to " bc 1 pszp ... rehc 4 ". The first one is used to pay the gas fee for the following " reveal " stage, and the other one is for change.

In the "reveal" phase, we can see that there are two utxo inputs, corresponding to the first two outputs in the previous commit phase. This transaction will first output an OP_RETURN, in which the hash of the initial state of CAT 20 will be saved. After that, a Minter will be output, which will play an important role in the subsequent Mint process and is used to maintain the state changes of the Mint process.

Looking back at the entire Deploy process, "commit" and "reveal" follow the two steps of submission and revealing commonly used on the blockchain. It is a common way to deploy projects. Some project data will only be revealed in the "reveal" stage.

As

Let’s first look at the Mint Token transaction.

As you can see in the figure above, Mint's process has the following characteristics.

  • The input of mint is a minter, which is initially generated during deploy.

  • Each mint has only one minter as input and any number of minters as output (a bit problematic)

  • Each mint has one and only one token (a bit problematic)

  • The output order is required, minter must be followed by token

Knowing the Mint process, we can actually find some special situations that will make the entire Mint process interesting.

For example, minter is the output of mint transaction, it can be 1, multiple or even 0. If it is set to 1 each time mint is performed, the number of minters available in the entire network will remain the same (1), which will make mint crowded and everyone will need to grab this minter. To avoid this situation, the number of minters output each time needs to be set to greater than 1, so that after mint, everyone will have more and more minters available.

However, each additional minter output means that you need to pay an additional utxo. For economic reasons, more people will be willing to set the minter to 0, which will inevitably make the minter deflationary. This requires some people to make contributions and voluntarily pay for the extra minter.

In version V2, two Minters are generated by default, and the status of the two Minters will be as close as possible.

Transaction Construction

Maybe you have discovered a problem, that is, why can minter's utxo be used to construct transactions? To understand this problem, you need to analyze the source code of the "contract".

1、reveal utxo

First, we analyze the transaction in the reveal process, and we find that it uses the output commit of the previous transaction as input. Why can we use a utxo that is not our address to construct the input of the transaction?

According to common sense, a private key corresponds to a public key, and the public key derives the address. When verifying whether an input utxo is valid, it is generally determined by comparing the signature after decryption with the public key to see if it is consistent with the original transaction. This part of the logic is written in the Bitcoin script. So we can cleverly rewrite the logic of the script. The public and private key pairs written in the script are our own addresses, so that we can control the utxo of two different addresses.

Looking at the source code we can see what happened:

There is another question here, that is, one private key corresponds to one public key, so why is the generated commit address different from our address? Here we can see from the source code

That is, our private key will adjust the public key based on an ISSUE_PUBKEY, which is also a feature of the P 2 TR address.

2、minter uxo

In the reveal process, we use different utxo as input, but the encryption key is actually the same, which is the deployer's private key. However, in the minter stage, everyone can use these utxo as input. How is this done?

I guess this part is the OP_CAT capability mentioned earlier, that is, the smart contract capability. Each minter is a smart contract. However, the source code of this part is not public yet, so I don’t know how it is implemented.

Transaction Status (V2)

In minter, the state is also retained. This state exists in two places: one is in the OP_RETURN of the transaction output, and the other is stored in the smart contract, which is the Minter and Token mentioned above.

The Hash of the current transaction output status is stored in OP_RETURN, and the remaining mint times of the token are stored in the contract. After each mint, the mint amount of the newly generated minter will be equal to the remaining mint amount divided by two. Represented by a diagram:

When the game is finally over, the remaining number of all Minters is 0.

Back to the first picture, in addition to Minter being a smart contract, the generated token is also a smart contract, that is, CAT 20. CAT 20 has two basic states: quantity and the address of the token owner. You can see that unlike the previous BRC 20 or inscription, your CAT 20 is not on the UTXO of your address.

Transfer

When transferring, the number of input and output tokens in the transaction must be consistent. Of course, there can be multiple different tokens in the same transaction, as long as the number of input and output tokens of different tokens is consistent.

Burn

If you want to burn the token, just transfer it to a normal address.

Summarize

As you can see, all operations are constructed by the users themselves, which is very flexible, so a lot of verification logic needs to be done in the contract part. Some of the vulnerabilities that have been exposed so far are also due to negligence in the verification logic.

This design can have some benefits:

  • If you want to find the holding status of all tokens, you only need to check the utxo of the token, and there is no need to continue to check upwards.

  • If you want to check the current status of mint, you can search for transactions with cat in the OP_RETURN data.

ZAN is here to get water without any threshold!

Tip: You can receive 0.01 ETH free testnet token every 24 hours to support your experience and testing of Web3 projects in the Ethereum ecosystem. Click to receive it now: https://zan.top/faucet?chInfo=ch_WZ

More public chains will be supported soon~

This article was written by Yeezo (X account @GaoYeezo 75065) of ZAN Team (X account @zan_team)