Tutorial
Add/Remove Margin of a Running Grid
Frequently Asked Questions
Tutorial
Last updated: 8 Nov 2024
Disclaimer: In compliance with MiCA requirements, unauthorized stablecoins are subject to certain restrictions for EEA users. For more information, please click here.
Grid trading is a trading bot that automates the buying and selling of Futures contracts. It is designed to place orders in the market at preset intervals within a configured price range.
Grid trading is when orders are placed above and below a set price, creating a grid of orders at incrementally increasing and decreasing prices. In this way, it constructs a trading grid. For example, a trader could place BTC buy orders at every 1,000 USDT below the market price and place sell orders at every 1,000 USDT above the market price to take advantage of ranging conditions.
Grid trading performs best in volatile and sideways markets when prices fluctuate in a given range. This technique attempts to make profits on small price changes. The more grids you include, the greater the frequency of trades will be. However, it comes with an expense as the profit you make from each order is lower.
Thus, it is a tradeoff between making small profits from many trades, versus a strategy with lower frequency but generates a bigger profit per order.
How does Binance Grid Trading work?
Binance Grid Trading now supports USDⓈ-M and COIN-M Futures. You can customize and set grid parameters to determine the grid's upper and lower limits and the number of grids. Once the grid is created, the system automatically buys or sells orders at preset prices.
Let’s understand how it works.
You expect Bitcoin to hover in a price range between 50,000 USDT and 60,000 USDT in the next 24 hours. In this case, you could set up a grid trading system to trade within this predicted range.
On the grid trading panel, you could set parameters of the bot, including:
- The upper and lower boundaries of the price range;
- The number of orders to be placed within the configured price range; and
- The width between each buy and sell limit order.
In this scenario, as the BTC price falls toward 55,000 USDT , the grid trading bot will accumulate buy positions on the way down at a lower-than-market price. As the price recovers, the bot will sell on the way up at a higher-than-market price. This strategy essentially attempts to profit from price reversions.
For more details, please read What Is Long/Short Grid Trading?.
Risk Warning: Grid trading as a strategic trading tool should not be regarded as financial or investment advice from Binance. Grid trading is used at your discretion and at your own risk. Binance will not be liable to you for any loss that might arise from your use of the feature. It is recommended that users should read and fully understand the Grid Trading tutorial and make risk control and trade rationally within their financial ability.
How to set up a Grid Trading strategy?
1. Log in to your Binance account and go to [Futures]. Click [Trading Bots] - [Futures Grid].
If you’re using the app, go to [Futures] - [USDⓈ-M] or [COIN-M]. Tap [Grid] at the bottom left.
2. Select a symbol to execute the strategy and set the grid parameters. Select the grid direction (Long, Short, or Neutral), the range, the number of grids, and order size. Then click [Create] to confirm.
Please note that the following conditions might prevent the successful creation of a new grid:
- If there is an existing active grid trading bot for the chosen symbol.
- If there are open orders or open positions associated with the selected symbol.
- If the account is set to the Hedge Mode; it must be adjusted to the One-Way Mode.
- If the maximum limit for grid strategies has been reached:
- You can have up to 54 grid strategies for USDⓈ-M Futures: 50 on Cross Margin and 4 on Isolated Margin.
- This is separate from COIN-M Futures, which has a limit of 50 grid strategies using Cross Margin grid trading mechanism.
Grid trading mechanism
Let’s use the USDⓈ-M Futures BTCUSDT Perpetual contract as an example to understand the process for grid trading.
- Setting a grid trigger (optional)
- Defining the initial structure of your grid strategy
- Initial grid creation process
- Grid update
- Setting a stop trigger (optional)
- Order cancellation
Setting a grid trigger (optional)
For parameters #10 & #11:
You can place your grid limit orders immediately or trigger them when the market price reaches a certain value. The grid orders will be triggered when the market price (Last Price or Mark Price) rises above or falls below the trigger price you enter.
Defining the initial structure of grid strategy
For parameters #1, #2,# 3,# 4, and #6:
You can determine a series of price levels according to the latest market price (buy, sell, mid-price), and place sell limit orders at a price higher than the market price, and a buy limit order at a price lower than the market price. After that, you can wait for the limit orders to be triggered and executed.
How to create the initial grid?
For neutral grids, the strategy does not involve an initial position. Instead, the initial position is established only when the market exceeds the closest price point after the initial setup.
Example:
Suppose you have set your strategy parameters as such:
- Contract: BTCUSDT Perpetual
- Lower price: 20,000 USDT
- Upper price: 45,000 USDT
- Number of grids: 5
- Mode: Arithmetic
The price distribution will be as follows: 20,000 USDT, 25,000 USDT, 30,000 USDT, 35,000 USDT, 40,000 USDT, 45,000 USDT
Initial sell orders for the neutral grid will be placed above the current market price. Meanwhile, the buy orders will be populated below the current market price. Note that the price nearest to the market price would be excluded. In this scenario, the initial grid limit orders will be populated as such:
| Direction | Price |
| Sell | 45,000 USDT |
| Sell | 40,000 USDT |
| Buy | 30,000 USDT |
| Buy | 25,000 USDT |
| Buy | 20,000 USDT |
Grid update
Grid update means that every time a price point is touched, i.e., a limit order is filled, the grid limit order will update in time. The price of the most recently executed order will always be the one that is switched off, meaning it will not trigger any order. Buy or sell limit orders are then filled in again according to the set parameters to maintain the number of limit orders in the grid.
For example, the initial market price is 10,010 USDT , and the grid limit price at each unit is:
Price | Direction |
10,200 USDT | Sell |
10,100 USDT | Sell |
10,000 USDT | Buy |
9,900 USDT | Buy |
9,800 USDT | Buy |
Assuming that the price drops to 10,000 USDT and the buy order (the initial open position) is executed, the grid limit orders will become:
Price | Direction |
10,200 USDT | Sell |
10,100 USDT | Sell |
10,000 USDT | - |
9,900 USDT | Buy |
9,800 USDT | Buy |
Let’s assume the price then rises to 10,100 USDT, triggering the execution of the 10,100 USDT sell order. The grid limit orders will be updated as follows:
Price | Direction |
10,200 USDT | Sell |
10,100 USDT | - |
10,000 USDT | Buy |
9,900 USDT | Buy |
9,800 USDT | Buy |
If after that the price drops to 9,900 USDT, the two buy orders (10,000 USDT and 9,900 USDT) are then executed, and the grid limit orders will be subsequently updated as follows:
Price | Direction |
10,200 USDT | Sell |
10,100 USDT | Sell |
10,000 USDT | Sell |
9,900 USDT | - |
9,800 USDT | Buy |
And so on.
Setting a stop trigger (optional)
For parameter #12:
You can manually terminate the grid operation or set a Stop Trigger. There are 3 options for setting Stop Triggers:
- Price Trigger: This activates when the latest or mark price of the grid reaches the take-profit or stop-loss price you set, causing the grid to terminate.
- PNL Trigger: This activates when the total profit of the grid (calculated by the mark price) reaches the take-profit or stop-loss PNL you set, leading to grid termination.
- ROI% Trigger: The system calculates the corresponding PNL based on the ROI% you set, and the grid terminates when the total profit (calculated by the mark price) reaches the specified take-profit or stop-loss level.
You can also set whether you want to keep the position open when the grid take profit and stop loss trigger the termination. This setting is independent of other termination scenarios, such as termination due to insufficient margin.
Order cancellation
For parameters #13:
You can choose to close all positions manually or automatically after the grid has been stopped.
When the close all positions on stop is enabled, the system will automatically close all open positions at market price for the symbol when the grid is stopped. This option will not affect your TP/SL settings. If the price reaches the TP or SL, your positions will be closed or remained open depending on your TP/SL settings.
Please note that during grid operation, the following scenarios will cause the grid to terminate:
- Manually terminate the grid;
- Insufficient margin causes some positions to be liquidated or fail to place orders;
- When the delivery contract is delivered, the product no longer exists and the grid strategy will be automatically stopped. During the delivery process, the system will automatically remove your limit orders and settle open positions.
The system will notify you if a grid is currently in operation. For example, the recommended grid trading leverage is below 20x. If the leverage continues to be higher than 20x, you will see a second reminder to lower the leverage.
How to set up the grid trading parameters?
Choose the contract on which the trading bot will be deployed.
1. Margin mode and leverage for grid trading
All grids, whether in USDⓈ-Margined or COIN-Margined, operate in the Cross Margin mode by default.
In the Cross Margin mode, the margin is pooled together and shared among all trading pairs within the user’s strategy Futures account.
Start by adjusting the leverage. Please note that leverage magnifies both gains and losses. With leverage, you can magnify relatively small price movements to potentially create profits. However, leverage is a double-edged sword, please use it prudently.
2. Lower/Upper price
*Cannot be modified after placing the grid order
Set the lower price and the upper price of the grid. If the highest or the lowest grid is exceeded, no more positions will be opened. For example, if the current BTCUSDT perpetual Futures price is 48,000 USDT and you expect the price will fall when it goes above 49,000 USDT. In this case, you can set the upper price to 49,000 USDT. After the price reaches 49,000 USDT, the grid will no longer open positions.
3. Arithmetic/Geometric Mode
*Cannot be modified after placing the grid order
Arithmetic: Each grid has an equal price difference.
The arithmetic grid divides the price range from grid_lower_limit to grid_upper_limit into grid_count by an equal price difference.
The price difference of each grid is:
price_diff = (grid_upper_limit - grid_lower_limit) / grid_count
Then it constructed a series of price intervals:
price_1 = grid_lower_limit
price_2 = grid_lower_limit + price_diff
price_3 = grid_lower_limit + price_diff * 2
...
price_n = grid_lower_limit + price_diff * (n-1)
At grid_upper_limit, n = grid_count
Example: Arithmetic price_diff = 100: 1,000, 1,100, 1,200, 1,300, 1,400,... (the next price is 100 higher than the previous one)
Geometric: Each grid has an equal price difference ratio.
The geometric grid divides the price range from grid_lower_limit to grid_upper_limit into grid_count by an equal price ratio.
The price ratio of each grid is:
price_ratio = (grid_upper_limit / grid_lower_limit) ^ (1/grid_count)
The price difference of each grid is:
price_diff_percentage = ( (grid_upper_limit / grid_lower_limit) ^ (1/grid_count) - 1) * 100%
Then it constructed a series of price intervals:
price_1 = grid_lower_limit
price_2 = grid_lower_limit * price_ratio
price_3 = grid_lower_limit * price_ratio ^ 2
...
price_n = grid_lower_limit * price_ratio ^ (n-1)
At grid_upper_limit, n = grid_count
Example: Geometric grid price_diff_percentage = 10%: 1,000, 1,100, 1,210, 1,331, 1,464.1,... (the next price is 10% higher than the previous one)
4. Grids (i.e., number of limit orders)
*Cannot be modified after placing the grid order
- Minimum: 2
- Maximum: 169
Note: Price difference cannot be lower than the tick size, otherwise you need to adjust the Grid_count or Grid upper/lower limit.
How to calculate?
1). Arithmetic grid, price_diff = (grid_upper_limit - grid_lower_limit)/gridCount < tickSize
2). Geometric grid, min_price_diff = grid_lower_limit*price_ratio < tickSize , price_ratio = (grid_upper_limit / grid_lower_limit) ^ (1/grid_count)
5. Profit/Grid (After deducting the trading fees)
If the profit/grid is less than the maker commission, you will be notified that the total grid profit may not be able to cover trading fees.
How to calculate? (The profit/grid displayed is for reference only)
1). Arithmetic grid
d = (grid_upper_limit - grid_lower_limit) / grid_count
c = TradingFeeRate (your current maker fee rate)
profit_per_grid_lower = (grid_upper_limit * (1-c)) / (grid_upper_limit-d) - 1 - c
profit_per_grid_higher = (1-c) * d / grid_lower_limit-2c
Example: Price interval = 1,000 - 2,000, Grid_count = 10, Commission = 0.1%
Price difference of each grid is = (2000-1000) / 10 = 100
profit_per_grid_lower = (2000*(1-0.1%)) / (2000-100) - 1 - 0.1% = 5.05%
profit_per_grid_higher = (1-0.1%) * 100 / 1,000 - 2 * 0.1% = 9.79%
2). Geometric grid
r = (grid_upper_limit/grid_lower_limit) ^ (1/grid_count）
c =TradingFeeRate (your current maker fee rate)
profit_per_grid_geo = (1-c) * r - 1 - c
Example: Price interval = 1,000 - 2,000, Grid_count = 10, Commission = 0.1%
Price ratio of each grid is = (2,000 / 1,000) ^ (1/10) = 107.18%
Profit/grid = (1 - 0.1%) * 107.18% - 1 - 0.1% = 6.97%
6. Initial Margin
*Cannot be modified after placing the grid order
Initial margin = initial_value / leverage
You can adjust the percentage of the investable amount up to 100% (Initial margin = percentage * margin balance). Please note that it must be within the interval between the min_initial_margin and the margin balance.
For USDⓈ-M Futures Grid
Calculate the min grid qty:
min grid qty = max(minQty, minNotional/grid_lower_limit)
- Direction Neutral
min_initial_margin= min grid qty * sum (price)/ (leverage * adjust_coef）
- Direction Long/Short Grid
“assuming price” is defined as per the following formulas:
assuming_price (BUY) = price*
assuming_price (SELL) = max (mark_price, price)
*”price” is the price of every order in the grid trading strategy, automatically set by the grid parameters. This definition applies every time “price” is quoted moving forward in the article.
min_initial_margin = sum (min grid qty * assuming price + leverage * min grid qty * abs {min [0, side * (mark price - price)]}) / (leverage * adjust_coef)
Note: If you have set a trigger price, the mark price should be replaced by the trigger price.
For COIN-M Futures Grid
Calculate the minimum grid quantity:
min grid qty = minQty
- Direction Neutral
min_initial_margin = min grid qty * sum (contract_multiplier / price) / (leverage * adjust_coef)
- Direction Long/Short Grid
Define the assuming price:
assuming price (BUY)= min( mark price, price)
assuming price(SELL) = price
min_initial_margin = min grid qty * sum (contract_multiplier /assuming price + leverage * contract_multiplier * abs {min [0, side * (1 / Order's Price - 1 / mark price)]}) / （leverage * adjust_coef）
*”min grid qty” is the minimum trade amount of the symbol. You can find more details on the trading rules page.
*If you have set a trigger price, the mark price should be replaced by the trigger price.
*Currently, the adjust_coef has defaulted to 0.8. It will be adjusted according to market conditions.
7. Total Investment
*Cannot be modified after placing the grid order
Total Investment = Initial Margin * Leverage
Total Investment = Initial Margin * Leverage
8. Qty/Order
For USDⓈ-M Futures Grid
Direction Neutral:
grid_qty = adjust_coef * initial_margin * leverage / sum (price)
Direction Long/Short Grid:
“assuming price” is defined as per the following formula:
assuming_price (BUY) = price
assuming_price (SELL) = max (mark_price, price)
grid qty = adjust_coef * initial_margin * Leverage / sum (assuming_price + leverage * abs (min (0, side * (mark_price-price)) ) )
*If you have set a trigger price, the mark price should be replaced by the trigger price.
For COIN-M Futures Grid
Direction Neutral:
grid qty = adjust_coef * initial_margin * leverage / sum (1 / price)
Direction Long/Short Grid:
“Assuming price” is defined as per the following formula:
assuming_price (BUY) = min(mark price, price)
assuming_price (SELL) = price
grid qty = adjust_coef * initial_margin * Leverage / sum(contract_multiplier /assuming_price + leverage *contract_multiplier* abs(min(0, side*(1 / price - 1 / mark price)) ) )
*If you have set a trigger price, the mark price should be replaced by the trigger price.
9. Available Margin Balance
Under Default Mode, it will show the margin balance of your USDⓈ-M or COIN-M Futures account. Under Portfolio Margin Mode, you will see the available balance in your spot wallet.
10. Trigger_type: Last Price / Mark Price
*Optional, can be modified before the grid is triggered
1). Grid trigger type: When the last price or the market price you choose reaches the trigger price, the grid will start running.
2). Stop trigger type: When the last price or the market price reaches the top or bottom stop price, the grid will be stopped.
11. Trigger_price
*Optional, can be modified after placing a grid order
Your grid order will be triggered when the last price or the mark price rises above or falls below the trigger price you set.
12. Stop Trigger
*Optional, can be modified after placing the grid order
1. Price Trigger
- For Neutral grid, it is called Stop top price;
- For Long grid, it is called Take profit price;
- For Short grid, it is called Stop loss price.
The stop_upper_limit price should be higher than the upper price, the last price, and the trigger price. When the latest market price reaches the Stop_upper_limit, the grid will stop working.
Stop_lower_limit price
- For Neutral grid, it is called Stop bottom price;
- For Long grid, it is called Stop loss price;
- For Short grid, it is called Take profit price.
The stop_lower_limitprice should be lower than the lower price, the last price, and the trigger price. When the latest market price reaches the Stop_lower_limit, the grid will stop working.
2. PNL Trigger
The calculation of the total profit will be based on the mark price, which may not be consistent with the data displayed on the page (the data displayed on the page is calculated by last price).
3. ROI% Trigger
The system will calculate the PNL corresponding to the ROI% you entered, and determine whether the conditions for triggering the TP/SL are met based on the estimated PNL.
4. Close All Positions on TP/SL Stop
You can also set whether or not you want to keep the position open when the grid take profit or stop loss triggers the termination. This setting is independent of other termination scenarios, such as termination due to insufficient margin.
13. Close All Positions on Stop
*Optional, can be modified after placing the grid order
You can enable this function to automatically close all open positions of the symbol at the market price when the grid stops. This option will not affect your TP/SL settings. If the price reaches the TP or SL, your positions will be closed or remain open depending on your TP/SL settings.
*Please note that the above parameter setting suggestions are for reference only. Futures trading carries a substantial risk and the possibility of both significant profits and losses. Past gains are not indicative of future returns. All of your margin balance could be liquidated in the event of extreme price movement. Binance shall not be liable for any of your losses.
How to calculate the current margin?
position_notional = Latest_Mark_Price * size
position_notional_value = abs (position notional)
present notional = max (abs (position_notional + open order's bid_notional), abs (position_notional - open order's ask_notional))
*Abs: absolute value
open order's ask_notional = askNotional
open order's bid_notional = bidNotional
- Crossed margin:
Current margin = present notional / current leverage - Isolated margin:
Current margin = (present notional - position_notional_value) / leverage + isolatedWalletBalance
Maintaining an optimal margin is vital for ensuring the smooth functioning of your trades using Futures Grid Trading.
The "Add/Remove Margin" feature on Binance Futures Grid provides you the flexibility to manage your margin for running trades. This can be particularly useful to avoid liquidations, especially in a volatile market.
Adding margin gives your trade more cushion, while removing margin retrieves excess funds from a position.
However, adjusting the margin doesn't affect the actual size of the position or the Return On Equity (ROE).
However, adjusting the margin doesn't affect the actual size of the position or the Return On Equity (ROE).
The maximum amount you can remove is determined by either the profit earned from the grid or any additional margin you've added after the grid's creation.
In other words, the upper limit for removal is the lesser of the two following values:
In other words, the upper limit for removal is the lesser of the two following values:
- Your current balance minus the initial margin, or
- The maximum withdrawal amount available in the trading bot's cross margin balance.
Please note, for Portfolio Margin Mode: The creation of your Futures Grid and the adjustment of margin will transfer funds from your Spot Account. If you have enabled BNB fee payment, your BNB fee deduction will still use the asset in your USDⓈ-M futures wallet, which will lead to changes in the equity and risk level of the portfolio margin account. Please pay attention to the risk level to avoid liquidation of the Portfolio Margin account.
How to use the add/remove margin function to Running Grid?
If you’re using the Binance website:
1. Go to the trading interface and find your running orders.
2. Look for the position you want to adjust. Click the [+] button next to the initial margin.
3. A pop-up box will appear, you can choose to add margin or remove margin.
4. Specify the amount of margin you wish to add or remove from the selected grid.
Note: The interface will provide insights, such as the margin balance change and the margin ratio change, to give you a clear picture of the outcome from your input. Please note that adjusting your margin will not modify your position size or your ROE.
If you’re using the Binance app Pro version:
1. Go to [Trading Bots] - [Futures Grid].
2. Tap [All Orders].
3. Tap [Adjust Margin].
Alternatively, you can also go to the [Running Order Detail] page and tap the [+] button next to your margin balance.
4. You’ll see a pop-up window. Choose [Add Margin] or [Remove Margin]. Then, enter the margin amount you wish to add to or remove from the selected grid.
How to check my grid details?
| Time | The time when the grid was created |
| Symbol | Click on the leverage next to the symbol to adjust the grid leverage |
| Initial Margin | Margin at the time of grid creation |
| Total Profit | Total Profit = Realized Profit + Unrealized PnL + Funding Fee Notes: If the [Close all positions on stop] function is enabled with open positions under the grid, all positions will be closed at market price after the grid stops. The PnL of the closing positions are included in the grid profit. |
| Total Profit (%) | ROI = Total Profit / initial_margin * 100% |
| Matched profit | The total profit for each matched order. |
| Unmatched PnL | Unmatched PnL = Total Profit - Matched Profit - Funding Fee |
| Realized profit | Realized profit and loss from grid trading is the cumulative realized profits of all completed orders, minus the trading fees. For arithmetic grid, Total Profit = Number of Completed Orders * Profit/Grid - Total Commission |
| Unrealized PnL | Unrealized profit and loss on open positions calculated based on Last Price, and return on equity percentage |
| Duration | The time the grid has been in operation since the grid is triggered |
| Liq. Price | Please refer to the calculation of the liquidation price for USDⓈ-M Futures contracts and COIN-M Futures contracts. |
| Bots Risk Ratio | The Bots Risk Ratio(BRR) indicates the likelihood of your grid being terminated due to insufficient margin. A lower ratio means higher risk. If the Bots Risk Ratio drops below 1.0, your grid will expire. BRR = margin balance / current margin = (cross wallet balance + unrealized PNL) / current margin Please refer to the calculation of the current margin for more details. Notes: Extreme market conditions may cause discrepancies between the displayed ratio and actual grid status. This ratio serves as a reference. Always check the grid's actual status for accurate information. |
| Grid Status |
|
- Grid Termination
You can click [End] under [Action] to stop the grid. You can also choose to cancel unfilled orders and close all positions manually or automatically after the grid is stopped.
When the [Cancel all orders on stop] function is enabled, the system will automatically cancel all unfilled orders of that symbol when the grid is stopped. When the [Close all positions on stop] function is enabled, the system will automatically close all open positions of the symbol at the market price when the grid is stopped.
- Running Grid Order
You can see all your open orders, including partially filled orders.
- Completed orders
You can see a summary of all completed orders. Each transaction consists of a pair of corresponding buy and sell orders. Profits are calculated based on each pair of matched buy and sell orders.
Please note that the BNB commission fee is converted into margin assets using the real-time exchange rate at the time of the transaction.
How to check my grid history?
Go to the [History] tab to check your grid order history and view grid details.
Grids Status
Canceled: You manually terminated the grid
Expired: The grid was terminated due to the reasons below:
- The order failed to place;
- You manually placed or canceled an order, which caused the grid to stop (only for old grid orders);
- The market price has reached the take-profit or stop-loss price of the grid strategy;
- The position has been liquidated;
- The maximum number of open orders has been reached;
- Insufficient margin account balance;
- The order price is above the limit price;
- The market is closed or paused;
- A position failed to close or was unable to fill;
- The maximum allowable notional value at the current leverage level has been exceeded.
What could lead to the automatic cancellation of my Futures Grid on Binance?
Symbol max leverage adjustment
1. What happens when Binance adjusts a symbol's max leverage?
If Binance adjusts the leverage bracket for a particular symbol, active grid orders using leverage above this new limit will expire whenever a new order is placed.
If Binance adjusts the leverage bracket for a particular symbol, active grid orders using leverage above this new limit will expire whenever a new order is placed.
For example, if ADAUSDT initially had a maximum allowable leverage of 75x and is subsequently deleverage to 70x, all running grids with leverage settings between 71x and 75x will be terminated as soon as new orders are placed.
2. How to prevent my grid from expiring due to leverage changes?
- Keep an eye on the leverage settings in the Binance Futures trading interface to ensure you're within the acceptable range for your trading pairs.
- Use a leverage level well within the current max leverage bracket can offer some safety buffers.
- Always refer to the Trading Rules to monitor the max leverage per symbol on USDⓈ-M and COIN-M Futures markets.
Symbol delisting
In rare cases, a trading pair may be delisted. This will cause all corresponding grid orders to expire. Always keep an eye on Binance’s announcements for such occurrences.
Insufficient margin
Grids may also expire if there isn't sufficient margin to support them. Make sure to monitor the Bots Risk Ratio of your account and top-up your margin as needed.
Liquidation
If the market moves against your position substantially, the risk of liquidation increases. Using lower leverage or adding more margin can help mitigate this risk.
Understanding the Close All Positions on Stop feature
The Close All Positions on Stop (CPS) feature allows traders to halt their trading strategy and manage their open positions more effectively. It’s designed to give traders more control over their open positions when they decide to terminate or stop their grid trading strategy.
When terminating your grid strategy, you can decide whether to keep the position open or close via market orders.
At present, we support the setting tokeep positions open in 2 scenarios. The first is a take-profit and stop-loss scenario [Close All Positions on TP/SL Stop], and second includes all other termination scenarios [Close All Positions on Stop].
For example, if you want to stop your BTCUSDT perpetual grid (or any other trading pair grid), you’ll be prompted to select whether the system should close all open positions; this setting is applicable for all termination scenarios, except for those where the take-profit and stop-loss trigger the termination.
- Choosing "Yes, please help me close all positions" means that all current positions will be closed at the prevailing market price once the grid is ended.
- Choosing "No, I’ll handle it myself" requires you to manually close all positions after terminating the grid.
If you have set a stop-loss price and want to set a different CPS setting thanother scenarios, you can set [Close All Positions on TP/SL Stop].
Pre-setting the CPS
When setting up the grid order, you have the option to pre-set whether you want to activate the CPS feature. This means you can decide in advance if your positions should automatically close at market price once the grid stops, offering more automation and peace of mind.
Notes
Regardless of whether you choose to enable or disable the CPS feature, the system will cancel the grid's open orders upon the termination of the grid.
If the CPS feature is activated, all positions associated with that grid will be closed at the current market price. If disabled, the positions will remain open, but you must manage them manually after the grid's termination.
In essence, the Close Position on Stop feature provides you with an added layer of strategy management.
When you end the grid but choose to keep your positions, you can check them under the [Running] tab and use market or limit orders to close any position.
If you use a limit order to close a position, you can check the open orders under the [Running] tab and cancel any order you see fit.
To view executed orders, go to the [Trading Bots Order] page.
